Looking for a specific product?

Make a search for products & suppliers, articles & news.

Processing plan for development of Oseberg Delta phase 2

The Norwegian Petroleum Directorate (NPD) has received the Plan for Development and Operation (PDO) for Oseberg Delta phase 2.

The Delta structure is located about 14 kilometres southwest of the Oseberg field centre in the North Sea. The structure is located within the Oseberg area unit, mainly in block 30/9 in production licences 79 and 104, where Statoil is the operator.

Oseberg Delta was previously developed with a subsea template tied in to the Oseberg field centre, and currently has two production wells.  

At Oseberg Delta phase 2, Delta will be further developed with two new subsea templates, and the drive mechanism will be changed from depressurisation to partial pressure maintenance based on gas injection. Most of the injected gas will be sold during a later phase.

The two new subsea templates will also be connected to the Oseberg field centre via the existing Delta subsea template. One of the two pipes that currently transport the gas from Tune to Oseberg will be reused to transport gas for injection from Oseberg to Delta.

The project entails investments of just under NOK 8 billion, and the expected production is 4.6 million standard cubic metres (Sm3) of oil and 7.7 billion Sm3 of gas. The oil and gas volumes will appear as increased reserves on Oseberg in the NPD’s next resource accounts, since Oseberg Delta is not considered a separate field. Production from Oseberg Delta phase 2 is scheduled to start in 2015.

The licensees in Oseberg area unit and thus also for the development of Oseberg Delta are Statoil, Petoro, Total E&P Norge AS and ConocoPhillips Skandinavia AS.         

 

 

Related news

Latest news

First phase of DNV GL led offshore cable and pipeline operations equipment joint industry project completed

The data analysed during phase 1 has identified and recorded various processes...

The end of the paper chase: DNV GL to roll out electronic certificates across entire fleet

Certificates are published on DNV GL’s customer portal immediately after an onboard survey is completed,

New Integrated Solution Set to Redefine DP Reference Systems

DPS i2 and DPS i4 utilise KONGSBERG's unique motion gyro compass (MGCTM) and motion reference unit (MRUTM) technology.

Servogear service hub in Asia

September 2017, Servogear announce the strengthening of our presence in Asia with the establishment of a service hub in Singapore.

New Machining Center In Fredrikstad

Jotne opened a brand new machining hall in Fredrikstad on the 20th of May.

Construction and Testing of 4 Caterpillar C280 Gensets Finalized

Jotne has together with thier client Pon Power finalized construction and testing of 4 Caterpillar C280 gensets in Jotne’s factory in Fredrikstad. 

DNV GL acquires specialist in CFD for fire and explosion analysis, ComputITG

With its roots in the offshore sector,

New land based contract with Sisomar

Sisomar’s philosophy is close to AKVA group’s underlying strategy to develop technological solutions based on good fish health and solid biology. 

Geothermal energy- an answer for selected areas in Poland

During the last weeks the experts have visited the selected sites in Poland and also been on a study visit to Iceland.